 |
| |
|
|
|
HYUPSHIN FLANGES |
1. 기준: ANSI B16.5, ASME B16.5
2. 종류:
Blind Flange, Blank Flange (Raised Face)
3. 압력등급: Class 150
4. 사이즈: 1/2" - 24", larger Sizes available on request
5.
강철: Carbon Steel: ASTM A105, A350
6. 생산공예: Forged or Stamped
7. ASTM raw material specification |
|
|
ANSI/ASME/ASA B16.5 150lb/sq.in. Flange BLIND-RF |
ø |
D |
b |
g |
k |
Holes |
l |
Kg. |
1/2" |
88,9 |
11,1 |
34,9 |
60,3 |
4 |
15,9 |
0,400 |
3/4" |
98,4 |
12,7 |
42,9 |
69,8 |
4 |
15,9 |
0,700 |
1" |
107,9 |
14,3 |
50,8 |
79,4 |
4 |
15,9 |
0,900 |
1 1/4" |
117,5 |
15,9 |
63,5 |
88,9 |
4 |
15,9 |
1,300 |
1 1/2" |
127,0 |
17,5 |
73,0 |
98,4 |
4 |
15,9 |
1,600 |
2" |
152,4 |
19,0 |
92,1 |
120,6 |
4 |
19,0 |
2,600 |
2 1/2" |
177,8 |
22,2 |
104,8 |
139,4 |
4 |
19,0 |
4,100 |
3" |
190,5 |
23,8 |
127,0 |
152,4 |
4 |
19,0 |
5,000 |
3 1/2" |
215,9 |
23,8 |
139,7 |
177,8 |
8 |
19,0 |
6,400 |
4" |
228,6 |
23,8 |
157,2 |
190,5 |
8 |
19,0 |
7,100 |
5" |
254,0 |
23,8 |
185,7 |
215,9 |
8 |
22,2 |
9,000 |
6" |
279,4 |
25,4 |
215,9 |
241,3 |
8 |
22,2 |
11,800 |
8" |
342,9 |
28,6 |
269,9 |
298,4 |
8 |
22,2 |
21,000 |
10" |
406,4 |
30,2 |
323,4 |
361,9 |
12 |
25,4 |
30,000 |
12" |
482,6 |
31,7 |
381,0 |
431,8 |
12 |
25,4 |
45,000 |
14" |
533,4 |
34,9 |
412,7 |
476,2 |
12 |
28,6 |
59,000 |
16" |
596,9 |
36,5 |
469,9 |
539,9 |
16 |
28,6 |
79,000 |
18" |
635,0 |
39,7 |
533,4 |
577,8 |
16 |
31,7 |
97,000 |
20" |
698,5 |
42,9 |
584,2 |
635,0 |
20 |
31,7 |
124,000 |
22" |
749,3 |
46,0 |
641,2 |
692,1 |
20 |
34,9 |
151,000 |
24" |
812,8 |
47,6 |
692,1 |
749,3 |
20 |
34,9 |
188,000 |
|
NOTE:
1. Class 150 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option. |
|
| |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
